|
Features and benefits
 Thin
wall cannula : pressure is less high. The liquid flow is wide
and penetrates slowly, with better respect of tissue.
Stainless
steel of the cannula in compliance with the ISO 9626
standard.
Silicone-coated
cannula : the cannula is treated with liquid silicone for
better penetration of the needle into tissues.
Triple
bevel : the front end of the cannula is ground to allow smoother
penetration into tissues and reduce the possibility of tissue
damage.
Bevel
indicator : helps localize the bevel and thus aids the practitioner
in the accurate placement of all injections.
Threaded
hub : the plastic hub thread complies with the ISO 7885 standard
relative to « sterile dental injection needles for single
use », and fits any syringe complying with the ISO 9997
standard relative to « dental cartridge syringes »).
There are 2 types of threading: inch thread (also called American
or non metric) and metric thread (also called European). These
2 threads have different dimensions.
Coloured
cap according to the ISO 7885 standard : yellow for 30G and
grey for 27G: helps identify the needle.
Paper
seal : coloured label sealing the needle, that helps identify
the diameter and length of the needle, the batch number, the
expiry date and the sterilization mode.
Ethylene
oxide sterilization : XL by SOFIC needles are sterilized under
ethylene oxide, a validated process under constant control.
On request, gamma ray irradiation sterilization is also possible.
Download
the literature
Our Range
XL by SOFIC needles are available in different diameters
and lengths.
Download
the table of sizes
How to use
Download
instructions for use
|
